Från verkstadhandboken för RR 1990. filen för stor att ladda med här.

ABS warning light – (amber) – 2
WARNING: Power assisted braking is not
available if the ignition is switched off. An
increase in effort at the pedal will be required to
apply the brakes.
. .
The ABS warning light situated in the instrument
binnacle indicates that there is a failure in the ABS
system. The light will illuminate when the ignition is
switched ON , and will extinguish when the vehicle
exceeds 7 km/h (5 mph) This indicates that the
system sell monitoring check was successful, and
the system performs correctly.
If the light remains on or subsequently illuminates
with the ignition ON a fault in the ABS system is
indicated. The self monitoring procedure is
repeated frequently while the ignition is ON . If a
fault is detected during self monitoring, the light
will illuminate indicating that one or more wheels
are not under ABS control.
WARNING: Reduced ABS control is possible with
the ABS warning light illuminated depending on
the severity and type of fault. If both ABS and
brake failure warning lights are illuminated, loss
of system pressure or hydraulic pump failure is
indicated.
IT IS ESSENTIAL THAT THE DRIVER HAS THE .‘.
FAULT INVESTIGATED IMMEDIATELY.

/Roger

Lite feedback, tipset om pckningssats och byta tätningen var klockren. Jag hade dragit på jobbet ett halvår, sedan tog jag tag i det. Tog två timmar på gårdsplan. Behövde inte ens hissa upp bilen. Två månader senare är det fortfarande tätt. Tack än en gång för tipset.